A Day In The Life #4 - Printing My Big Scarf

Today has been the big day!! I've finally printed up the main part of my exhibition which is my big scarf!! Keep reading if you want to know how I did it and see how it looked in stages.

To get started I washed down the printing table I was working on and dried it too. I then measured to where my screen would be once placed on the registration bar and laid my fabric in the correct place on the table so my fabric would be clear of 1 inch on each side so I can clean the ends up on the sewing machine at a later date. I used masking tape to tape my fabric down, making sure its straight and its pulled tightly. 

I then got my pigment's together, As I am recreating one of my samples I am using the same colour pigments I used on that sample.

ignore the back colour as I did not need this or use this for my exhibition scarf. 

Once I had my colour's sorted it was time to print, As my screen's and fabric are so large I had to have the help of kathryn to help me print my screens also because I had not used the registration bar before. First off I printed the pink pigment.

After I had printed this colour I was so excited because it was finally coming to life, I washed and put my screen to dry while this pink pigment was drying, I then got my next screen and got ready to print again this time in blue pigment, This will go over some of the pink at a slight angle to make a purple colour with a blue shadow and also just be blue in other places it is printed.

 I then used my third screen and printed the cells to my fabric and this is what the end product looked like.

I am so so so so excited and in love with the outcome of my big exhibition scarf I can't even put it into word's, The colours are just beautiful and I am so proud of the print. I now need to add my mixed media onto the top of it, Such as sewing my needle feltings onto it and adding my holographic heat transfer, Also using dissolvable fabric and angelina fibers to sew onto it. I still have my work cut out but the end product will be so so worth it. I got gave so many packets of angelina fibers today from my tutor it felt like Christmas!!

After I had printed my big scarf I had time to print one of my normal sized scarfs which I shall sell at my exhibition, The one I chose to print was the orange/pink coloured light silk scarf. I started by masking taping the fabric down. I used similar colours but not exactly the same as they were different shades and instead of doing my cells green I did them a coral colour for this scarf. Here are the pictures after each screen print although I failed to get one of the end product, However I know you shall see it in a future blog post.

I did not get a picture after printing the last screen so I am sorry about that. After I took this off the print table and hung it to dry I instantly fell in love with it, The way the pattern and colours move on the floaty silk amazed me. I am so happy with the work I have done today and I cant wait to produce more.

My to do list from tonight is...

- Sew my needle felting's onto my big scarf.

- Do more dissolveable fabric on the sewing machine.

- Use angelina fibers and interfacing to create more mixed media for my big scarf.

- Use my holographic heat transfer material on my big scarf.

- Print up my other smaller scarfs and dye more material.

- Buy Petri Dishes and Jar's

I hope you have enjoyed tonights blog post, Come back tomorrow to see what I've been getting up to tomorrow.

Thankyou for reading.

Holographic Heat Transfer - The Science Of Textile's

A few days ago I got a delivery through the post and I got so excited!!... Its my holographic heat transfer paper, A full meter of it!! Yesterday was my day off college but I went in to use the heat press to do add some holographicness to my samples which I had already printed on which you can see in my previous post's. I started by getting my samples out and seeing how big the circular shapes were that I needed to cut out of my holographic transfer paper. I cut out the circles from my transfer paper, I had used a bottle lid to draw around to make a perfect circle. I next placed the sample on the heat press between the two A3 sized sheets which you place what ever your using on the heat press in between so it doesn't burn.

I then took the backing off the transfer paper and placed it on the sample in the correct place. Then placing the top sheet over the sample carefully not to move the sample or heat transfer paper or burn my self. I then correctly used the heat press. The heat press is set to around 180 degrees which is very hot so it is very important to be careful when using it. It is also set to a timer of 18 seconds which is the only amount of time you will need.

Once the 18 seconds was up I lifted the heat press up using the handle and carefully lifted the top sheet up to reveal my sample sandwiched between the two sheet's. I waited a couple of seconds for it to cool down then I took it out to see the results.

I am really happy with the outcome of my samples which I used the holographic heat transfer on. It really gives it the finishing touch. As I have one screen not exposed which is the background of the cells which will be light green, As the heat transfer paper fills in some of the background colour, I think if I also use the other light green screen you will not be able to see as much of the background and I don't want that to happen as I think the background really make's the scarf come to life. Therefore I do not think I shall be using my light green screen. 

In conclusion I am really happy with my samples and I can not wait to see it on a bigger scale!

I am going on holiday for the weekend tonight and will not be posting on my blog as I will not have been at college or at home to blog. 

I hope everyone enjoyed this blog post and loves the outcome of my samples as much as I do! 

Thankyou for reading!